l1l3Bridger
Classes
Erc20L1L3Bridger
Bridger for moving ERC20 tokens from L1 to L3
Extends
BaseL1L3Bridger
Properties
| Property | Modifier | Type | Default value | Description |
|---|---|---|---|---|
_l1FeeTokenAddress | protected | undefined | string | undefined | If the L3 network uses a custom fee token, this is the address of that token on L1 |
l2ForwarderFactoryDefaultGasLimit | readonly | BigNumber | ... | Default gas limit for L2ForwarderFactory.callForwarder of 1,000,000 Measured Standard: 361746 Measured OnlyGasToken: 220416 Measured NonGasTokenToCustomGas: 373449 |
l2GasTokenAddress | readonly | undefined | string | undefined | If the L3 network uses a custom (non-eth) fee token, this is the address of that token on L2 |
teleporter | readonly | Teleporter | undefined | Addresses of teleporter contracts on L2 |
Methods
_checkL1Network()
protected _checkL1Network(sop: SignerOrProvider): Promise<void>
Check the signer/provider matches the l1Network, throws if not
Parameters
| Parameter | Type | Description |
|---|---|---|
sop | SignerOrProvider |
Returns
Promise<void>
Inherited from
BaseL1L3Bridger._checkL1Network
Source
assetBridger/l1l3Bridger.ts:306
_checkL2Network()
protected _checkL2Network(sop: SignerOrProvider): Promise<void>
Check the signer/provider matches the l2Network, throws if not
Parameters
| Parameter | Type | Description |
|---|---|---|
sop | SignerOrProvider |
Returns
Promise<void>
Inherited from
BaseL1L3Bridger._checkL2Network
Source
assetBridger/l1l3Bridger.ts:314
_checkL3Network()
protected _checkL3Network(sop: SignerOrProvider): Promise<void>
Check the signer/provider matches the l3Network, throws if not
Parameters
| Parameter | Type | Description |
|---|---|---|
sop | SignerOrProvider |
Returns
Promise<void>
Inherited from
BaseL1L3Bridger._checkL3Network
Source
assetBridger/l1l3Bridger.ts:322
_decodeCallForwarderCalldata()
protected _decodeCallForwarderCalldata(data: string): L2ForwarderParamsStruct
Given raw calldata for a callForwarder call, decode the parameters
Parameters
| Parameter | Type |
|---|---|
data | string |
Returns
L2ForwarderParamsStruct
Source
assetBridger/l1l3Bridger.ts:1402
_decodeTeleportCalldata()
protected _decodeTeleportCalldata(data: string): TeleportParamsStruct
Given raw calldata for a teleport tx, decode the teleport parameters
Parameters
| Parameter | Type |
|---|---|
data | string |
Returns
TeleportParamsStruct
Source
assetBridger/l1l3Bridger.ts:1388
_fillPartialTeleportParams()
protected _fillPartialTeleportParams(
partialTeleportParams: OmitTyped<TeleportParamsStruct, "gasParams">,
retryableOverrides: Erc20L1L3DepositRequestRetryableOverrides,
l1Provider: Provider,
l2Provider: Provider,
l3Provider: Provider): Promise<object>
Given TeleportParams without the gas parameters, return TeleportParams with gas parameters populated. Does not modify the input parameters.
Parameters
| Parameter | Type |
|---|---|
partialTeleportParams | OmitTyped<TeleportParamsStruct, "gasParams"> |
retryableOverrides | Erc20L1L3DepositRequestRetryableOverrides |
l1Provider | Provider |
l2Provider | Provider |
l3Provider | Provider |
Returns
Promise<object>
| Member | Type |
|---|---|
costs | [BigNumber, BigNumber, number, RetryableGasCostsStructOutput] & object |
teleportParams | object |
teleportParams.amount | BigNumberish |
teleportParams.gasParams | RetryableGasParamsStruct |
teleportParams.l1Token | string |
teleportParams.l1l2Router | string |
teleportParams.l2l3RouterOrInbox | string |
teleportParams.l3FeeTokenL1Addr | string |
teleportParams.to | string |
Source
assetBridger/l1l3Bridger.ts:1194
_getL1L2FeeTokenBridgeGasEstimates()
protected _getL1L2FeeTokenBridgeGasEstimates(params: object): Promise<RetryableGasValues>
Estimate the gasLimit and maxSubmissionFee for the L1 to L2 fee token bridge leg of a teleportation
Parameters
| Parameter | Type |
|---|---|
params | object |
params.feeTokenAmount | BigNumber |
params.l1GasPrice | BigNumber |
params.l1Provider | Provider |
params.l2ForwarderAddress | string |
params.l2Provider | Provider |
params.l3FeeTokenL1Addr | string |
Returns
Promise<RetryableGasValues>
Source
assetBridger/l1l3Bridger.ts:1056
_getL1L2TokenBridgeGasEstimates()
protected _getL1L2TokenBridgeGasEstimates(params: object): Promise<RetryableGasValues>
Estimate the gasLimit and maxSubmissionFee for the L1 to L2 token bridge leg of a teleportation
Parameters
| Parameter | Type |
|---|---|
params | object |
params.amount | BigNumberish |
params.l1GasPrice | BigNumber |
params.l1Provider | Provider |
params.l1Token | string |
params.l2ForwarderAddress | string |
params.l2Provider | Provider |
Returns
Promise<RetryableGasValues>
Source
assetBridger/l1l3Bridger.ts:1024
_getL2ForwarderFactoryGasEstimates()
protected _getL2ForwarderFactoryGasEstimates(l1GasPrice: BigNumber, l1Provider: Provider): Promise<RetryableGasValues>
Estimate the gasLimit and maxSubmissionFee for L2ForwarderFactory.callForwarder leg of a teleportation. Gas limit is hardcoded to 1,000,000
Parameters
| Parameter | Type |
|---|---|
l1GasPrice | BigNumber |
l1Provider | Provider |
Returns
Promise<RetryableGasValues>
Source
assetBridger/l1l3Bridger.ts:1095
_getL2L3BridgeGasEstimates()
protected _getL2L3BridgeGasEstimates(params: object): Promise<RetryableGasValues>
Estimate the gasLimit and maxSubmissionFee for the L2 -> L3 leg of a teleportation.
Parameters
| Parameter | Type |
|---|---|
params | object |
params.l1Provider | Provider |
params.l2ForwarderAddress | string |
params.l2GasPrice | BigNumber |
params.l2Provider | Provider |
params.l3Provider | Provider |
params.partialTeleportParams | OmitTyped<TeleportParamsStruct, "gasParams"> |
Returns
Promise<RetryableGasValues>
Source
assetBridger/l1l3Bridger.ts:1117
_getTokenBridgeGasEstimates()
protected _getTokenBridgeGasEstimates(params: object): Promise<RetryableGasValues>
Estimate the gasLimit and maxSubmissionFee for a token bridge retryable
Parameters
| Parameter | Type |
|---|---|
params | object |
params.amount | BigNumber |
params.childProvider | Provider |
params.from | string |
params.isWeth | boolean |
params.parentErc20Address | string |
params.parentGasPrice | BigNumber |
params.parentGatewayAddress | string |
params.parentProvider | Provider |
params.to | string |
Returns
Promise<RetryableGasValues>
Source
assetBridger/l1l3Bridger.ts:976
_l2ForwarderFactoryCalldataSize()
protected _l2ForwarderFactoryCalldataSize(): number
Returns
number
The size of the calldata for a call to L2ForwarderFactory.callForwarder
Source
assetBridger/l1l3Bridger.ts:1366
approveGasToken()
approveGasToken(params: TxRequestParams | object): Promise<ContractTransaction>
Approve the L3's fee token for teleportation. The tokens will be approved for L1Teleporter. Will throw if the L3 network uses ETH for fees or the fee token doesn't exist on L1.
Parameters
| Parameter | Type |
|---|---|
params | TxRequestParams | object |
Returns
Promise<ContractTransaction>
Source
assetBridger/l1l3Bridger.ts:701
approveToken()
approveToken(params: TxRequestParams | TokenApproveParams & object): Promise<ContractTransaction>
Approve tokens for teleportation. The tokens will be approved for L1Teleporter.
Parameters
| Parameter | Type |
|---|---|
params | TxRequestParams | TokenApproveParams & object |
Returns
Promise<ContractTransaction>
Source
assetBridger/l1l3Bridger.ts:659
deposit()
deposit(params: TxRequestParams | Erc20L1L3DepositRequestParams & object): Promise<ParentContractCallTransaction>
Execute a teleportation of some tokens from L1 to L3.
Parameters
| Parameter | Type |
|---|---|
params | TxRequestParams | Erc20L1L3DepositRequestParams & object |
Returns
Promise<ParentContractCallTransaction>
Source
assetBridger/l1l3Bridger.ts:811
getApproveGasTokenRequest()
getApproveGasTokenRequest(params: object): Promise<Required<Pick<TransactionRequest, "data" | "value" | "to">>>
Get a tx request to approve the L3's fee token for teleportation. The tokens will be approved for L1Teleporter. Will throw if the L3 network uses ETH for fees or the fee token doesn't exist on L1.
Parameters
| Parameter | Type |
|---|---|
params | object |
params.amount? | BigNumber |
params.l1Provider | Provider |
params.l2Provider | Provider |
Returns
Promise<Required<Pick<TransactionRequest, "data" | "value" | "to">>>
Source
assetBridger/l1l3Bridger.ts:682
getApproveTokenRequest()
getApproveTokenRequest(params: TokenApproveParams): Promise<Required<Pick<TransactionRequest, "data" | "value" | "to">>>
Get a tx request to approve tokens for teleportation. The tokens will be approved for L1Teleporter.
Parameters
| Parameter | Type |
|---|---|
params | TokenApproveParams |
Returns
Promise<Required<Pick<TransactionRequest, "data" | "value" | "to">>>
Source
assetBridger/l1l3Bridger.ts:640
getDepositParameters()
getDepositParameters(params: object & TxReference): Promise<object>
Given a teleportation tx, get the L1Teleporter parameters, L2Forwarder parameters, and L2Forwarder address
Parameters
| Parameter | Type |
|---|---|
params | object & TxReference |
Returns
Promise<object>
| Member | Type |
|---|---|
l2ForwarderAddress | Promise<string> |
l2ForwarderParams | L2ForwarderParamsStruct |
teleportParams | TeleportParamsStruct |
Source
assetBridger/l1l3Bridger.ts:837
getDepositRequest()
getDepositRequest(params: Erc20L1L3DepositRequestParams & object | object): Promise<DepositRequestResult>
Get a tx request for teleporting some tokens from L1 to L3. Also returns the amount of fee tokens required for teleportation.
Parameters
| Parameter | Type |
|---|---|
params | Erc20L1L3DepositRequestParams & object | object |
Returns
Promise<DepositRequestResult>
Source
assetBridger/l1l3Bridger.ts:732
getDepositStatus()
getDepositStatus(params: GetL1L3DepositStatusParams): Promise<Erc20L1L3DepositStatus>
Fetch the cross chain messages and their status
Can provide either the txHash, the tx, or the txReceipt
Parameters
| Parameter | Type |
|---|---|
params | GetL1L3DepositStatusParams |
Returns
Promise<Erc20L1L3DepositStatus>
Source
assetBridger/l1l3Bridger.ts:878
getGasTokenOnL1()
getGasTokenOnL1(l1Provider: Provider, l2Provider: Provider): Promise<string>
If the L3 network uses a custom gas token, return the address of that token on L1. If the fee token is not available on L1, does not use 18 decimals on L1 and L2, or the L3 network uses ETH for fees, throw.
Parameters
| Parameter | Type |
|---|---|
l1Provider | Provider |
l2Provider | Provider |
Returns
Promise<string>
Source
assetBridger/l1l3Bridger.ts:431
getL1L2GatewayAddress()
getL1L2GatewayAddress(erc20L1Address: string, l1Provider: Provider): Promise<string>
Given an L1 token's address, get the address of the token's L1 <-> L2 gateway on L1
Parameters
| Parameter | Type |
|---|---|
erc20L1Address | string |
l1Provider | Provider |
Returns
Promise<string>
Source
assetBridger/l1l3Bridger.ts:532
getL1TokenContract()
getL1TokenContract(l1TokenAddr: string, l1Provider: Provider): IERC20
Get the L1 token contract at the provided address Note: This function just returns a typed ethers object for the provided address, it doesn't check the underlying form of the contract bytecode to see if it's an erc20, and doesn't ensure the validity of any of the underlying functions on that contract.
Parameters
| Parameter | Type |
|---|---|
l1TokenAddr | string |
l1Provider | Provider |
Returns
IERC20
Source
assetBridger/l1l3Bridger.ts:560
getL2Erc20Address()
getL2Erc20Address(erc20L1Address: string, l1Provider: Provider): Promise<string>
Get the corresponding L2 token address for the provided L1 token
Parameters
| Parameter | Type |
|---|---|
erc20L1Address | string |
l1Provider | Provider |
Returns
Promise<string>
Source
assetBridger/l1l3Bridger.ts:508
getL2L3GatewayAddress()
getL2L3GatewayAddress(
erc20L1Address: string,
l1Provider: Provider,
l2Provider: Provider): Promise<string>
Get the address of the L2 <-> L3 gateway on L2 given an L1 token address
Parameters
| Parameter | Type |
|---|---|
erc20L1Address | string |
l1Provider | Provider |
l2Provider | Provider |
Returns
Promise<string>
Source
assetBridger/l1l3Bridger.ts:545
getL2TokenContract()
getL2TokenContract(l2TokenAddr: string, l2Provider: Provider): L2GatewayToken
Get the L2 token contract at the provided address Note: This function just returns a typed ethers object for the provided address, it doesn't check the underlying form of the contract bytecode to see if it's an erc20, and doesn't ensure the validity of any of the underlying functions on that contract.
Parameters
| Parameter | Type |
|---|---|
l2TokenAddr | string |
l2Provider | Provider |
Returns
L2GatewayToken
Source
assetBridger/l1l3Bridger.ts:570
getL3Erc20Address()
getL3Erc20Address(
erc20L1Address: string,
l1Provider: Provider,
l2Provider: Provider): Promise<string>
Get the corresponding L3 token address for the provided L1 token
Parameters
| Parameter | Type |
|---|---|
erc20L1Address | string |
l1Provider | Provider |
l2Provider | Provider |
Returns
Promise<string>
Source
assetBridger/l1l3Bridger.ts:518
getL3TokenContract()
getL3TokenContract(l3TokenAddr: string, l3Provider: Provider): L2GatewayToken
Get the L3 token contract at the provided address Note: This function just returns a typed ethers object for the provided address, it doesn't check the underlying form of the contract bytecode to see if it's an erc20, and doesn't ensure the validity of any of the underlying functions on that contract.
Parameters
| Parameter | Type |
|---|---|
l3TokenAddr | string |
l3Provider | Provider |
Returns
L2GatewayToken
Source
assetBridger/l1l3Bridger.ts:583
l1TokenIsDisabled()
l1TokenIsDisabled(l1TokenAddress: string, l1Provider: Provider): Promise<boolean>
Whether the L1 token has been disabled on the L1 <-> L2 router given an L1 token address
Parameters
| Parameter | Type |
|---|---|
l1TokenAddress | string |
l1Provider | Provider |
Returns
Promise<boolean>
Source
assetBridger/l1l3Bridger.ts:593
l2ForwarderAddress()
l2ForwarderAddress(
owner: string,
routerOrInbox: string,
destinationAddress: string,
l1OrL2Provider: Provider): Promise<string>
Given some L2Forwarder parameters, get the address of the L2Forwarder contract
Parameters
| Parameter | Type |
|---|---|
owner | string |
routerOrInbox | string |
destinationAddress | string |
l1OrL2Provider | Provider |
Returns
Promise<string>
Source
assetBridger/l1l3Bridger.ts:613
l2TokenIsDisabled()
l2TokenIsDisabled(l2TokenAddress: string, l2Provider: Provider): Promise<boolean>
Whether the L2 token has been disabled on the L2 <-> L3 router given an L2 token address
Parameters
| Parameter | Type |
|---|---|
l2TokenAddress | string |
l2Provider | Provider |
Returns
Promise<boolean>
Source
assetBridger/l1l3Bridger.ts:603
teleportationType()
teleportationType(partialTeleportParams: Pick<TeleportParamsStruct, "l1Token" | "l3FeeTokenL1Addr">): TeleportationType
Get the type of teleportation from the l1Token and l3FeeTokenL1Addr teleport parameters
Parameters
| Parameter | Type |
|---|---|
partialTeleportParams | Pick<TeleportParamsStruct, "l1Token" | "l3FeeTokenL1Addr"> |
Returns
TeleportationType
Source
assetBridger/l1l3Bridger.ts:953
EthL1L3Bridger
Bridge ETH from L1 to L3 using a double retryable ticket
Extends
BaseL1L3Bridger
Methods
_checkL1Network()
protected _checkL1Network(sop: SignerOrProvider): Promise<void>
Check the signer/provider matches the l1Network, throws if not
Parameters
| Parameter | Type | Description |
|---|---|---|
sop | SignerOrProvider |
Returns
Promise<void>
Inherited from
BaseL1L3Bridger._checkL1Network
Source
assetBridger/l1l3Bridger.ts:306
_checkL2Network()
protected _checkL2Network(sop: SignerOrProvider): Promise<void>
Check the signer/provider matches the l2Network, throws if not
Parameters
| Parameter | Type | Description |
|---|---|---|
sop | SignerOrProvider |
Returns
Promise<void>
Inherited from
BaseL1L3Bridger._checkL2Network
Source
assetBridger/l1l3Bridger.ts:314
_checkL3Network()
protected _checkL3Network(sop: SignerOrProvider): Promise<void>
Check the signer/provider matches the l3Network, throws if not
Parameters
| Parameter | Type | Description |
|---|---|---|
sop | SignerOrProvider |
Returns
Promise<void>
Inherited from
BaseL1L3Bridger._checkL3Network
Source
assetBridger/l1l3Bridger.ts:322
deposit()
deposit(params: TxRequestParams | EthL1L3DepositRequestParams & object): Promise<ParentContractCallTransaction>
Deposit ETH to L3 via a double retryable ticket
Parameters
| Parameter | Type |
|---|---|
params | TxRequestParams | EthL1L3DepositRequestParams & object |
Returns
Promise<ParentContractCallTransaction>
Source
assetBridger/l1l3Bridger.ts:1521
getDepositParameters()
getDepositParameters(params: object & TxReference): Promise<object>
Given an L1 transaction, get the retryable parameters for both l2 and l3 tickets
Parameters
| Parameter | Type |
|---|---|
params | object & TxReference |
Returns
Promise<object>
| Member | Type |
|---|---|
l1l2TicketData | RetryableMessageParams |
l2l3TicketData | RetryableMessageParams |
Source
assetBridger/l1l3Bridger.ts:1547
getDepositRequest()
getDepositRequest(params: EthL1L3DepositRequestParams & object | object): Promise<ParentToChildTransactionRequest>
Get a tx request to deposit ETH to L3 via a double retryable ticket
Parameters
| Parameter | Type |
|---|---|
params | EthL1L3DepositRequestParams & object | object |
Returns
Promise<ParentToChildTransactionRequest>
Source
assetBridger/l1l3Bridger.ts:1463
getDepositStatus()
getDepositStatus(params: GetL1L3DepositStatusParams): Promise<EthL1L3DepositStatus>
Get the status of a deposit given an L1 tx receipt. Does not check if the tx is actually a deposit tx.
Parameters
| Parameter | Type |
|---|---|
params | GetL1L3DepositStatusParams |
Returns
Promise<EthL1L3DepositStatus>
Information regarding each step of the deposit
and EthL1L3DepositStatus.completed which indicates whether the deposit has fully completed.